Instructions / Assembly

ManualsBrandsBarkan a Better Point of View ManualsAV AccessoriesBarkan 29 in. - 56 in. Swivel and Tilt, Tabletop TV Stand, Flat/Curved TV Wall Mount up to 44 lbs.

Table Of Contents

Page 1

Tilt

Height

adjustment

13.8”-19.3”

35-49cm

Swivel

Tabletop Stand TV & Monitor Mount

For more information: barkanmounts.com

TV Size

13”-65”

33cm-165cm

CAUTION This Mount is intended for use only

with the maximum weight indicated.

Using heavier products might cause injury.

If you are satisfied with the product, please give us a 5 stars  rating on the website you bought it from. If you

are not satisfied, please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.

TV Weight

36kg

79lbs

S320-MAN-ONL-2211

Warning! Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES

from tip over or the falling of the product and the electrical appliances. Opening the package represents

your undertaking to closely read and follow the instructions. This product is not intended for use in public

places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.com ›

Support › Safety Instructions & Warranty

0-15

Download Assembly Instructions with Text

Summary of content (12 pages)

PAGE 1
Page 1 Tabletop Stand TV & Monitor Mount Tilt Swivel Height adjustment 13.8”-19.3” 35-49cm Download Assembly Instructions with Text Warning! Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances. Opening the package represents your undertaking to closely read and follow the instructions. This product is not intended for use in public places.
PAGE 2
CAUTION! WGP-SC-BNG-2202-Online You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN WARNING! Barkan does not take responsibility for the installation and possible tip-over. Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances.
PAGE 3
LT DĖMESIO! „Barkan Mounts Ltd.“ neatsako u montavimą ir nukritimą. Jei nepaisysite saugos ir surinkimo instrukcijų, gaminys ir elektros prietaisai gali apvirsti arba nukristi, gali būti SUNKUS ARBA MIRTINAS SUŽALOJIMAS. Pakuotės atidarymas reiškia jūsų įsipareigojimą atidžiai perskaityti instrukcijas ir jų laikytis. Šis gaminys nėra skirtas naudoti viešose vietose. Saugos instrukcijų, garantijos ir papildomos informacijos rasite apsilankę: www.barkanmounts.
PAGE 4
Warnings! Tip Over Hazard! Keep children under the age of 15 away from the product 0 - 15 Anchor to the Wallusing 2 strong cables Collision Hazardplace the product in a position that will prevent people from colliding with it Page 2
PAGE 5
Included Hardware A B x1 Z5 Page 3 not to scale C D x1 x4 Z7 Z6 ``` E x1 Z8 x1 Z10 Z9 M6 M6 x4 x6 Y1 P1 Y3 Y2 x4 x2 x2 P2 x4 P3 M6 x4 Required Tools: x3 x1 x1 x1 x1 # M L mm L inch pcs Z1 4 16 𝟓 𝟖 4 Z2 6 16 𝟓 𝟖 6 Z3 8 20 𝟑 𝟒 4 Z4 8 45 1 𝟑 ” 𝟖 / 10mm No.
PAGE 6
Page 4 Wrong Right Purchase longer screws Purchase spacers in order to adjust the screws length inside the TV Continue according to your TV mounting hole pattern 75 – 100mm 200 – 400mm 1 2b 2a 2a 75x75 mm up to 100x100 mm hole pattern Z3/Z4 NO FORCE B Z1/Z2 Z5 3
PAGE 7
2b Page 5 Hole pattern 100x200 mm up to 400x400 mm: Disassemble the screws, connect the 4 adaptors to the TV plate and reassemble the screws.
PAGE 8
Page 6 Position the adaptors according to your TV’s hole pattern Max. 400mm 200mm 400mm TV 200mm 200mm Max.
PAGE 9
4 Page 7 Set the desired height and fully tighten Y1 on Z10. Y1 Z10 Z9 Y2 D 2¾” 7cm 5 2¾” 7cm Assemble the leg (A) onto the glass base (E). Make sure the metal plate’s (P3) tapered holes face out.
PAGE 10
6 Page 8 Connect the plastic nuts-housings (Z8), and then insert the nut (Z7). Z7 Z8 7 Weight test Apply force on the upper part of the product and make sure it is secure.
PAGE 11
9 Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully. Page 9 FALL PROOF Z5 10 Z2 Pass the cables through the cable management sleeve. CABLE MANAGEMENT 11 Level the TV.
PAGE 12
Page 10 To dismount the TV, disconnect the screws on both sides and lift the TV up.