Instructions / Assembly

ManualsBrandsBarkan a Better Point of View ManualsElectricalBarkan 19 in. to 65 in. Tilt Flat / Curved TV Wall Mount Up to 110 lbs.

Table Of Contents

Page 1

TV Wall Mount

Tilt

Download Assembly Instructions with Text

For more information: barkanmounts.com

TV Size

13”-65”

33cm-165cm

If you are satisfied with the product, please give us a 5 stars  rating on the website you bought it from. If you

are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.

TV Weight

50kg

110lbs

E310+-MAN-ONL-2304

Safety instructions and installation warnings (provided separately)

must be read in full, prior to assembly.

Summary of content (9 pages)

PAGE 1
Page 1 TV Wall Mount Tilt Download Assembly Instructions with Text For more information: barkanmounts.com E310+-MAN-ONL-2304 If you are satisfied with the product, please give us a 5 stars  rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.
PAGE 2
Page 2 Included Parts not to scale A B Wall plate Z7 Plastic spacer x1 Z8 Bubble level x1 x8 x4 W1 Metal washer TV rail x1 x1 Z4 Metal washer C TV rail W2 W3 Anchor x4 x4 Screw L L mm inch 6 16 5ൗ 8 4 Z2 6 25 1 4 Z3 4 20 3ൗ 4 4 Z5 8 25 1 4 Z6 8 45 13ൗ4 4 # M Z1 x4 Required Tools 7/16” 11 mm No.
PAGE 3
Page 3 Connect the Vertical rails to the back of the TV Wrong Right Purchase longer screws 1 Use the spacers (Z7) in order to adjust the screws length inside the TV Follow the steps according to your TV’s cable connection type. (Is it parallel or perpendicular to the wall?) 1b Page 4 1a 1a Connect the TV rails (B and C) to the back of the TV at all 4 connection holes, and place the plastic spacers (Z7) above the TV rails. Choose the bolt that fits the TV’s mounting holes diameter.
PAGE 4
Page 4 1b Connect the TV rails (B and C) to the back of TV at all 4 connection holes, while placing the plastic spacers (Z7) between the TV rails (B,C) and the back of the TV. Choose the screw that fits the TV’s mounting holes diameter.
PAGE 5
3 Follow the steps according to your wall type 4 Mark the holes on the wall according to the required height Page 5 Z8 Z8 A A Use a Stud Finder Make sure all holes are inside the studs 4a Page 6 Make sure there are no electrical/water line in the wall before drilling and then drill according to the marking 4b Page 6
PAGE 6
4a Page 6 4b First use 1/4” \ 6mm drill bit Drill with 5/32” \ 4mm drill bit 5/32” \ 4mm 1/4” \ 6mm 1 2.75” \ 70mm 2.75” \ 70mm Afterwards use 3/8” \ 10mm drill bit 2 3/8” \ 10mm 2.75” \ 70mm Z8 3/8”/ 10 mm The anchor must be sunk at least 3/8"/10 mm into the plaster coating A W3+W1 W2 1 Z8 W3+W1 7/16”/ 11mm 2 2 x 360° FULL TIGHTENING A 1 7/16”/ 11mm 2 FULL TIGHTENING 4 x 360°
PAGE 7
5 Page 7 Weight test 6 Apply force on the upper part of the Bracket and make sure it is well connected Connect the TV to the wall plate by hooking the upper part of the vertical rails on the wall plate TV 110Lbs/ 50Kg 7 Push slightly until you hear a “click”. 8 Test if the auto-lock mechanism is functioning. NO FORCE Push FALL PROOF 9 To adjust the lateral position, first lift the screen and then move it to the required position.
PAGE 8
Tighten the screw in order to create the necessary friction for the tool free tilt mechanism. 10 Page 8 TOUCH & TILT 11 To disconnect the TV, pull gently up and out.
PAGE 9
Page 9