Page 1 Extra Long Dual Arm TV Wall Mount Tilt Swivel For more information: barkanmounts.com BM464XL-MAN-ONL-04_2203 If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you. TV Size 13”-83” 33cm-211cm TV Weight US EU 110lbs 50kg CAUTION This Mount is intended for use only with the maximum weight indicated.
CAUTION! WGP-BASIC-BNG-2202-Online You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN WARNING! Barkan does not take responsibility for the installation. Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions.
IT ATTENZIONE! Barkan Mounts Ltd. non offr e garanzie per l‘installazione. Ignorare le istruzioni di sicurezza ed assemblaggio potrebbe provocare la caduta e/o il danneggiamento del vostro apparecchio elettrico. Nel momento in cui si apre la confezione si devono leggere e seguire tentamente le istruzioni. Quando il prodotto viene installato in luoghi pubblici, le persone responsabili in tali luoghi devono assicurarsi che venga utilizzato secondo le istruzioni.
CAUTION! You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN The anchor must be sunk at least 10 mm (3/8”) into the plaster coating ES NL El tarugo debe penetrar al menos 10 mm (3/8”) en el yeso. Het anker moet minimaal 10 mm (3/8”) in de gipslaag worden gezonken. FR DA Le crochet doit être introduit d’au moins 10mm (3/8“) dans la couche de plâtre.
EN Please ask your installer to provide a warranty for the installations of the product. Installation of this product is only authorized on non-moving building walls and ceilings. The included hardware is not suitable for installation on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! ES Solicite a su instalador que proporcione una garantía para las instalaciones del producto.
Included Parts A B Front Arms Bracket Z7 Wall Plate Plastic Cover Y5 Wall Plate Plastic Cover x1 x1 W1 x2 x1 x2 Y7 Cable Management x8 Y3 Y2 Y6 x1 x6 x4 x8 Drilling Template x4 S1 Sticker Y1 x8 E Adaptor x1 x4 W3 W2 D TV Plate Z8 x8 Y4 C x1 x1 Z6 Page 2 not to scale P1 Cable Management x2 x2 x4 P3 P2 x2 x2 L L mm inch 4 20 3ൗ 4 4 Z2 6 16 5ൗ 8 4 Z3 6 25 3ൗ 4 4 Z4 8 25 1 4 Z5 8 45 13ൗ4 4 # M Z1 Required Tools 7/16” 11 mm No.
Page 3 Connect the TV plate to the back of the TV. Wrong Right Purchase longer screws. Use the spacers (Z7) in order to adjust the screws length inside the TV. Continue according to your TV mounting hole pattern. 75 – 200mm 200 – 600mm 1 1b Page 4 1a 1a 75x75 mm up to 200X200 mm (inclusive) hole pattern.
1b 1 Page 4 Hole pattern above 200x200 mm up to 600x400 mm: Disassemble the screws. D 2 connect the 4 adaptors to the TV plate, and reassemble the screws.
Position the Adaptors according to your TV’s hole pattern. Max. 600mm Page 5 300mm 600mm 200mm 300mm 300mm Max. 400mm 400mm For more positioning options turn to page 12. Connect the TV Plate with the Adaptors to the TV in all 4 connection holes. Z4/Z5 FULL TIGHTENING NO FORCE Z1/Z2/Z3 Z6 Z7 Optional Optional – Corner installation Functionality may vary depending on the distance from the corner. Max. TV Size 80”\203cm A A 3 Page 7
Page 6 2 Install the bracket on the Wall. 5.9” / 14.9 cm Measure the distance between the location of the TV’s mounting holes’ E center and the bottom of the TV, in order to set the required height of the TV. 119cm 8” / 20.3 cm 16” / 40.6 cm Make sure the distance between the 2 holes is correct. HORIZONTAL CENTER LINE https://www.barkanmounts.
Follow the steps according to your wall type Page 7 3a Make sure all holes are drilled inside the studs Mark the holes on the wall according to the required height 4 X8 X6 CONNECTION POINTS CONNECTION POINTS Use a Stud Finder E 4a Page 8 E 4b Page 8
4a Page 8 4b Drill with 5/32” \ 4mm drill bit. First use 1/4” \ 6mm drill bit. 1/4” \ 6mm 1 5/32” \ 4mm 2.75” \ 70mm Afterwards use 3/8” \ 10mm drill bit. 3/8” \ 10mm 2 2.75” \ 70mm 2.75” \ 70mm W2 3/8”/ 10 mm 16" A The anchor must be sunk at least 3/8"/10 mm into the plaster coating.
5 Paste the 6 stickers on the Plastic Covers. Page 9 Assemble the Wall Plate Plastic Covers. 6 S1 Y5 S1 Y4 7 Connect the Front Arms (B) to the Bracket (A). Y3 Y1 FULL TIGHTENING Y2 B A 8 Weight test. 9 Apply force on the upper part of the Bracket and make sure it is well connected. Place two nuts (Z8) in the nut-housing (P2).
10 Page 10 Assemble the nut-housing (P2) make sure that the tab is inserted into the slot. P2 Make sure that the tab is inserted into the slot 11 Assemble part (P3) on the nut-housings (P2). push P3 down until the small part that looks like an upside down “T” passes the highlighted tooth. P3 upside down T part 12 Place the bracket upright and connect the TV plate with the TV. Make sure that the TV Plate slots are positioned properly on 2 small beams (Front Arms).
Page 11 13 Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully. Z6 Z2/Z3 14 Place the TV cables in the Cable Management. Y 6 15 FALL PROOF Y 7 CABLE MANAGEMENT Level the TV.
Page 12
