User manual

User Manual “Instreamer“ - V4.03 - 24th October 2013
View configuration
Enter up to 24 characters to secure the viewing of
the device configuration (Clicking the “Config”
button).
Without a valid password the device configuration
cannot be viewed! Enter 25 characters to erase the
current key.
View configuration password usage
When the password is set the user clicking on the
“Config” button has to type in the password into the
password field of the pop up window (the user name
does not matter).
Only one user can log in at a time, in which case
further attempts are refused.
To log out click on the “Logout” link at the top right
of the page.
Control / Command
Enter up to 24 characters to secure the access to all
control and command interfaces (WEB/CGI, Serial,
TCP and UDP). Without a valid password the device
cannot be controlled. Enter 25 characters to erase
the current key.
Note : This security option should be used very
carefully and is intended for advanced users only.
Since the CGI commands used in the web interface
do not make use of passwords, setting this
password would disable any control of the device
using a browser.
48 /63 BARIX AG | 28. Jan. 2014 | Device Configuration