User manual

CHAPTER 3
Menu System
32 Technospot
TM
User Manual
Calibration
This Test menu option lets you fine tune the home position for each parameter.
To calibrate Gobo Wheel 1 after homing:
1. Navigate to and select the Test menu as shown above.
2. Using the buttons, scroll to Calibration and press the button to select.
3. Using the buttons, scroll to Gobo Wheel 1 and press the button to select.
4. Using the buttons, adjust the Gobo Wheel 1 offset value and press the button to
store the calibration adjustment.
Preset Menu
The preset menu allows you to program scenes directly to the fixture. The options for designing
and playing back presets are described in Chapter 5: Preset Programming on page 47.
Battery Menu
This menu is only available when you are currently operating in Battery Mode. Use the following
steps to return to normal power mode:
1. Push the Mode/Esc button.
2. Use the button to scroll to Battery and press the button to select. Exit Battery will
display in red (not currently selected).
3. Press the button to select. The display will turn off.
MODE
/ ESC