User manual

CHAPTER 3
Menu System
Technospot
TM
User Manual 31
Test Options Menu
This menu lets you manually Home the fixture and change DMX values for parameters.
To Enter the Test Options Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
show Address and Info as the first two options in the top menu level.
The red star
*
indicates the current option.
2. Using the buttons, scroll to Test.
3. Press the button to select.
Homing the Fixture
The Technospot fixture automatically homes whenever it is connected to power. The following op-
tions are available to let you manually home all the fixture motors or motors for specific functions:
All: Reset all motors
Others: Reset other motors
Shutter: Reset shutter and/or dimmer
Gobos: Reset gobo wheels
Colors: Reset color wheel
Pan & Tilt: Reset Pan/Tilt motors
For example, to manually home the gobo wheel motors:
1. Navigate to and select the Test menu as shown above.
2. Using the buttons, scroll to Home and press the button to select.
3. Using the buttons, scroll to Gobos and press the button to select.The fixture
automatically begins homing the motors for Gobo Wheel 1 and Gobo Wheel 2.
Manual Ctrl
This test option lets you manually set a DMX value for any of the Technospot fixture’s 37 DMX
channels. Auto Program is the default setting. Refer to Chapter 4: DMX Programming on page
33 for specific information on DMX value settings for each parameter.
For example, to change the static color wheel position to blue:
1. Navigate to and select the Test menu as shown above.
2. Using the buttons, scroll to Manual Ctrl and press the button to select.
3. Using the buttons, scroll to Color Wheel and press the button to select the
fixed color wheel.
4. Using the buttons, scroll to a value from 48–79 and press the button to select
the blue color position on the fixed color wheel.
MODE
/ ESC