User manual

CHAPTER 3
Menu System
Technospot
TM
User Manual 29
Fan Control
This Set option lets you select High, Low or Auto fan speed for specific environmental
considerations.
To select high fan speed:
1. Navigate to and select the Set menu as shown on page 27.
2. Using the buttons, scroll to Fan Control and press the button to select.
3. Using the buttons, scroll to High and press the button to select.
Display Setting
This Set option lets you control how the display functions.
To select the Display Setting menu
1. Navigate to and select the Set menu as shown on page 27.
2. Using the buttons, scroll to Display Setting and press the button to select.
3. Using the buttons, scroll to one of the display options below and press the button
to select.
4. Using the buttons, scroll to the desired setting and press the button to select.
Shutoff Time
This option lets you determines when the display automatically shuts off after the last button
push. You can choose a delay from 01 – 60 minutes. The default delay setting is 02 minutes.
Flip Display
Use this option to rotate the display 180° when that orientation is easier to view. Off is the default
setting. Select On to flip the display. Note that this option only takes affect once you exit the
menu system using the MODE/ESC button.
Key Lock
This display setting lets you activate a key lock. Off is the default. Select On to activate the key
lock and then press and hold the MODE/ESC button for 2 seconds when you want to unlock
the menu.
Temp C/F
This options sets the temperature scale to Celsius or Fahrenheit. Celsius is the default setting.
MODE
/ ESC
MODE
/ ESC