User manual

CHAPTER 3
Menu System
Technospot
TM
User Manual 25
Lamp Menu
The Lamp menu lets you control lamp striking function.
To enter the Lamp Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
show Address and Info as the first two options in the top menu level.
2. Using the buttons, scroll to Lamp.
Note: The red star
*
indicates the current menu option.
3. Press the button to select.
Lamp On/Off
This option lets you manually turn the lamp on independant of any other input.
To turn the lamp on manually:
1. Navigate to and select the Lamp menu as shown above. Lamp On/Off is the first option you
will view. Press the button to select
2. Using the buttons, scroll to On and press the button to select.
Note: If the lamp is too hot to strike, this option will display ON and as soon
as the lamp cools it will automatically strike.
Lamp On/Pwr
This option automatically turns the lamp on when the fixture is connected to power.
To turn the lamp on when power is applied:
1. Navigate to and select the Lamp menu as shown above.
2. Using the buttons, scroll to Lamp On/Pwr and press the button to select.
3. Using the buttons, scroll to On and press the button to select.
Lamp On/DMX
This option automatically turns the lamp on when the fixture receives a DMX signal.
To turn the lamp on with DMX:
1. Navigate to and select the Lamp menu as shown above.
2. Using the buttons, scroll to Lamp On/DMX and press the button to select.
3. Using the buttons, scroll to On and press the button to select.
MODE
/ ESC