User manual

CHAPTER 3
Menu System
24 Technospot
TM
User Manual
Values Display
This menu option lets you view the current DMX value for each of the fixture’s 37 parameters.
To view DMX values by Parameter:
1. Navigate to and select the Info menu as shown on page 23.
2. Using the buttons, scroll to Values Display and press the button to select.
3. Using the buttons, scroll to any of the DMX parameters in the Technospot protocol
and press the button to view its current DMX decimal value.
Head Temperature
The Technospot fixture contains temperature sensors that monitor the air temperature inside the
lamp housing.
To view temperature:
1. Navigate to and select the Info menu as shown on page 23.
2. Using the buttons, scroll to Head Temp and press the button to select.
The temperature will be displayed in degrees Celsius or Fahrenheit depending on which scale
is currently selected in the Set menu, see
Temp C/F on page 29.
Software Version
This Info menu option displays the current fixture software loaded on the unit. Software versions
can vary even between units purchased at the same time.
To view fixture :
1. Navigate to and select the Info menu as shown on page 23.
2. Using the buttons, scroll to Software Ver and press the button to select.