User manual

CHAPTER 3
Menu System
Technospot
TM
User Manual 23
Information Menu
The Information menu displays current fixture information such as internal temperature, lamp
hours, total fixture hours, lamp strikes, and DMX values for parameters.
Lamp and Fixture hours resets are executed in the Information Menu.
To enter the Information Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
show Address and Info as the first two options in the top menu level.
2. Using the buttons, scroll to Info.
3. Press the button to select.
Time Info
The Time Info menu displays and resets certain time functions.
To view/reset time values or set passwords:
1. Navigate to and select Info menu as shown above. Time Info is the first option you will view.
2. Using the buttons, scroll to Time Info and press the button to select.
3. Using the buttons, scroll to any of the following menu options and press the
button to select.
Note: Clr Lamp Time and Clr Last Run do not have additional options. When
they are selected, they reset lamp hours or lamp run hours to 0.
Current Time Power On running time in hours
Ttl Life Hrs Fixture running time in hours
Last Run Hrs Lamp running time in hours
Lamp Hrs Total Lamp hours
LampOff Time Lamp off time in minutes
Timer PIN Use buttons to set a Timer Password (Default PIN = 038)
Clr Last Run Resets last run time to 0
L-Timer PIN Use buttons to set a Lamp Password (Default PIN = 038)
Clr Lamp Time Reset lamp time to 0
MODE
/ ESC