User Manual

2. Xenon bulb lamp replacement process

9 Nm

Image 2-10

5. Remove the protective container or unwr ap the protective cloth from the xenon bulb lamp.

Warning: Ensure that y ou wear protective clothing, a full face shield and protective gloves.

Tip: Write down the s erial number of the lamp. You will need this while updating the lamp param eters after installation of the

lamp. The serial number of the lamp is engraved in the neck of the xenon bulb lamp.

6. Gently guide the xenon bu lb lamp into position inside the lamp house as illustrated. Anode socket hanging vertical down. While

inserting the lamp, rotate it slightly, engaging the pins of the cathode adapter in the foreseen slots. This is to ensure the lamp

cathode is completely ins erted.

Warning: Make sure that the both pins of the cathode adapter are engaged in the foreseen slots.

Image 2-11

7. Insert the anode s ocket into position as illustrated.

Caution: Avoid any tension on the anode w ire, so there is no mech anical stress on the bulb of the lamp.

R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008