User manual

CHAPTER 4
Fixture Programming
Cyberlight
®
2.0 User Manual 39
Control Settings
The Control parameter activates certain Fixture functions. To access all Cyberlight 2.0 Control
settings (except for Pan & Tilt MSpeed Off), first select a control channel value, then set the
Shutter channel to “0.”
NOTE: The Control channel should not be crossfaded.
Control Setting Description
Safe Disables all Control settings for normal operation.
Pan & Tilt
MSpeed Off
Sets Pan & Tilt MSpeed to ignore MSpeed settings.
Display Off Sets display to off.
Set Shutter parameter = 0 to
access these control options
Display On Turns on the display.
Home All Remotely homes the fixture.
Lamp On Remotely restrikes the fixture’s lamp.
Lamp Off Remotely extinguishes the fixture’s lamp.
Shutdown Remotely deactivates the fixture.