User manual

CHAPTER 4
Fixture Programming
34 Cyberlight
®
2.0 User Manual
Rotating Gobo Wheel
Rotating Gobo Position
The Rotating Gobo Position parameter lets you select from the four factory provided
lithopatterns on the Rotating Gobo Wheel
3
5
4
2
1
open
Position Description
1Net
2 Red Rings
3 Open
4 Indigo Chicklet
5 Droplets
.
Rotating Gobo Function
The Rotating Gobo Function parameter setting determines how the individual aperture
wheels on the Rotating Gobo Wheel move.
Gobo Rotate Function Description
Indexed Rotates the specified indexed aperture to any position
Forward Rotate Forward aperture rotation from slowest to fastest
Reverse Rotate Reverse aperture rotation from slowest to fastest
Blink Closes and opens the shutter on rotate position changes
Forward Animate Rotate Forward aperture rotation in strobing steps
Reverse Animate Rotate Reverse aperture rotation in strobing step
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See
MSpeed
(Motor Speed) on page 38.
Rotating Gobo Rotate Coarse/Rotating Gobo Rotate Fine
When the Rotating Gobo Function channel is set to Indexed or Blink, these two channels
allows for 16-bit adjustment to the Rotating Gobo Wheel aperture position.
When a rotate option is selected in the Rotating Gobo Function parameter. the Rotating
Gobo Rotate Coarse parameter sets the selected aperture’s rotation speed from slow to fast.