User manual

CHAPTER 4
Fixture Programming
Cyberlight
®
2.0 User Manual 33
Static Gobo Wheel
Static Gobo Position
This parameter lets you select from seven factory provided litho patterns on the Static Gobo
Wheel
1
2
3
4
5
6
7
8
Position Description
1 Open
2 Leaves
3Dots
4 Abyss
5 Tunnel
6 Sharp Burst
7 Lapse
.
Static Gobo Function
This parameter provides options for how you control the wheel and gobo selection on the Static
Gobo Wheel.
Static Gobo Function Description
Indexed Takes the quickest path and snaps to the chosen gobo position on the wheel.
Forward Spin Spins the wheel forward through the gobo positions at variable speeds.
Reverse Spin Spins the wheel in reverse through the gobo positions at variable speeds.
Slow Scan Performs a scan of one gobo position from each side at a slow rate
Fast Scan Performs a scan of one gobo position from each side at a fast rate
Random Selects random gobo positions at variable speeds.
Blink Closes and opens the shutter between indexed gobo position changes.
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See
MSpeed
(Motor Speed) on page 38.