User manual

CHAPTER 4
Fixture Programming
Cyberlight
®
2.0 User Manual 31
Color Mixing Flags
The Cyberlight® 2.0 fixture has a full CMY color mixing system supplemented with an additional
wheel with eight static color options. Color mixing of the main beam utilizes CMY dichroic flags.
CMY Color Mixing
The Cyan, Magenta and Yellow color channels control the colors you can select. The CMY color
mixing system creates and infinite range of color by moving pairs of Cyan, Magenta and Yellow
flags. Color selection is available in either full speed (controller crossfading the flag positions),
or MSpeed (MSpeed control of the flag motor) modes. For more information on MSpeed, see
MSpeed (Motor Speed) on page 38.
Color Function
The Color Function you choose will effect which parameter values are available for each
individual color (Cyan, Magenta, and Yellow). The following table describes the Color Functions
available in the Cyberlight® 2.0 fixture.
Color Function Description
Continuous Allows exact positioning of the color flags
Random Selects whole color positions at variable speeds
Cycle Cycles through colors
Tri-Color, single flag Controls movement of one flag of a pair with the other flag open
Tri-Color, dual flag Controls movement of one flag of a pair with the other flag closed (fully saturated)
Tri Color Effect
Independent control over individual flags in each color pair allows you to create tri-color beam
effects. You can choose whether to control one or both flags of a pair.
Flag 1
Flag 2
SINGLE FLAG MODE
DUAL FLAG MODE
0
100%
Flag 1
Flag 2
127-128 254-255
50%