Service manual

Codec explorer hierarchy

◆

Codec explorer hierarchy

To access the user

interface

To access the settings for the S

TELLAR

, the ROSA PC must be connected to the unit,

either using ROSA/C

OPERNICUS

from a central control station or the ROSA Device

Configuration Shell on a locally connected PC. Proceed as follows:

1. Enter the C

OPERNICUS

Explorer window and select Properties.

2. Right-click on the S

TELLAR

icon in the C

OPERNICUS

Explorer window and

select Properties.

Now you have access to set all the parameters for the S

TELLAR

3. Click on the plus sign to see the incoming and the optional outgoing data

streams.

Note! The the outgoing data stream may also be a 19.39 Mbit/s

SMPTE 310M output.

For the data stream you see the transport stream ID and the network type.

4. Click on the plus sign to see the programs in the data stream.

For each program you see the most important settings such as program name,

program number and PMT PID. The red stroke across the program icons denotes

that they are inactive.

Note! Only one program at a time can be active.

If you activate a program it will be decoded.