Service manual

Codec-specific user interface
71
4
◆
Codec-specific user interface
General The codec specific user interface is activated by right-clicking on the wanted unit
from the C
OPERNICUS
explorer window and selecting Properties.
Tab pages The codec specific user interface consists of a number of tab pages:
T
The function of the tab pages is as follows:
• Codec Explorer
From this page you select the programs to activate, select program elements to
decode, and set up the values of the program elements.
• Messages
From this menu you set the various messages and alarms.
• Configuration
From this page you view the hardware and software configuration.
• Commands
From this page you may enter low level commands to the codec. For further infor-
mation, see the MPEG-2 Command reference, 983756.
• Clock
From this page you set the S
TELLAR
clock and date.
• Profile
From these pages you save the current S
TELLAR
settings for later download to
another S
TELLAR
.