Service manual

Installing ROSA/C
OPERNICUS
65
4
2. Connect the S
TELLAR
tothePCorconnecttheS
TELLAR
to the C
OPERNICUS
server and the C
OPERNICUS
server to the client PC.
In remote mode the user interface is stored on the C
OPERNICUS
server but can be
viewed by ROSA on the client PC.
.
When another ROSA client wants to control the device, the corresponding user
interface will automatically be uploaded from the C
OPERNICUS
server.
C
OPERNICUS
explorer
window
The user interface for the S
TELLAR
is part of the control and management software
ROSA/C
OPERNICUS
.TheS
TELLAR
appears in the C
OPERNICUS
explorer window as a
unit connected to the C
OPERNICUS
server.
Copernicus
server
RS 485
The settings are
stored in the
decoder.
The user interface
and the messages
are stored on the
Copernicus server.
Settings
Messages
BARCO
COPERNICUS Element Manager
ROSA
LAN/WAN
to ROSA client
STELLAR MPEG-2 Decoder
98-057