Service manual

58
Config – system settings
3
Front panel operation
◆
Config – system settings
Structure When you press the Config shortcut key the “Configuration” menu appears.
Each parameter is described in the following. For instructions on how to edit the
parameters, see Navigating and editing, p. 39.
The menu has the following structure:
System date Parameters DD/MM/YYY.
Description Sets the system date.
System time Parameters HH/MM/SS.
Description Sets the system time.
LCD contrast Range 0 to 100%.
Steps 1%.
Description Used to adjust the LCD contrast of the display.
Front COM port Parameters Addr: 1 to 7F
Baud: 9600, 19200, 38400
Description The address and baud rate on the front RS-232 communication
port. This port is used for local ROSA control.
Rear COM port Parameters Addr: 1 to 7F
Baud: 300, 1200, 2400, 4800, 9600, 19200, 38400
Description The address and baud rate on the rear RS-485 communication
port. This port is used for remote ROSA control.
View hardware config. Parameters Slot, Stock (display)
System date
__/__/____
Configuration
System time
__:__:__
LCD Contrast
___ %
Front COM-port
Addr: 0x__ Baud: _____
Rear COM-port
Addr: 0x__ Baud: _____
View hardware config.
Slot:___ Stock:_________
99-036