Service manual

User presets
55
3
◆
User presets
Structure When you press the Preset shortcut key the “User presets” menu appears.
For instructions on how to edit the parameters, see Navigating and editing, p. 39.
The menu has the following structure:
Function Using the settings and the user preset menus you can store up to 8 configurations
(presets) in the S
TELLAR
. A preset contains the information necessary to decode a
program, i.e. settings regarding input configuration and program selection.
Settings regarding configuration of outputs are not stored in the presets.
Presets are useful when you want to switch between different inputs and/or programs
in a fast and simple manner.
Implementation User presets are stored as macros in the S
TELLAR
so that Preset 1 is stored in MACro
1 CLOSE. Preset 2 is stored in MACro 2 CLOSE and so on.
As the user preset is a macro it is also possible to recall it by using the Contact Con-
trol inputs. For more information on Contact Control, see Connecting to the contact
control interface, p. 34.
Note! If both presets and macros are to be used simultaneously then be careful
to avoid using macros that are already being used as presets and vice
versa.
User presets
Recall user preset
1:Preset 1
2:Preset 2
3:Preset 3
4:Preset 4
5:Preset 5
6:Preset 6
7:Preset 7
8:Preset 8
Store as user preset
1:Preset 1
2:Preset 2
3:Preset 3
4:Preset 4
5:Preset 5
6:Preset 6
7:Preset 7
8:Preset 8
00-041