Service manual

Video output
49
3
Video information 1 Display Profile: Main or 4:2:2
Description Displays the decoded profile.
Video information 2 Display Width: 352, 704 or 720 pixels
Height: 576 or 608 lines for 625 lines systems
480 or 512 lines for 525 lines systems
Description Displays the number of horizontal pixels and the number of lines
in the decoded picture.
Video information 3 Display Chroma: 4:2:2 or 4:2:0
Aspect: 4:3 or 16:9
Description Displays the chroma format and the aspect ratio of the decoded
picture.
Video information 4 Display Bit rate: 1.5 to 50 Mbit/s
Description Displays the measured video bit rate.
Video output format Parameters PAL, PALplus, NTSC, PAL-M
625, 525.
Description You can select between 525 lines NTSC and PAL M if your
module option supports both formats. There is auto-selection
between 625 lines PAL and PALplus.
Videolinestart Parameters 6 to 23 for 635 lines systems, and 10 to 23 for 525 lines systems
Description Keep the line start on 23 unless the encoder is set up to use
extended picture area. Set the line start in the S
TELLAR
to the
same value as in the encoder.
Note! For the 4:2:0 profile there is no extended picture data. If you
move the start of the picture lines up you get the equivalent
number of blank lines in the bottom of the picture.