Service manual

Program selection

Front panel operation

◆

Program selection

Structure When you press the Program shortcut key, the “Program selection” appears.

Each parameter is described in the following. For instructions on how to edit the

parameters, see Navigating and editing, p. 39.

The menu has the following structure:

Select program Parameters No., Auto or Off

Description The number and name of the program to be decoded. You select

the program to be decoded by pressing the Enter key and stepping

through the list of available programs. If you select “Auto” the

TELLAR

automatically decodes the program with the lowest

number. “Off” disables decoding.

Select audio 1 PID Description The audio program to be decoded. A program may contain several

audio signals. You select the audio program to be decoded by

pressing the Enter key and stepping through the list of available

audio programs. If you select “Auto” the S

TELLAR

automatically

decodes the audio program with the lowest PID not already in use.

“Off” disables decoding. This is the primary audio output.

Select audio 2 PID Description The audio program to be decoded. Audio 2 PIDs can only be

selected if an audio module is installed in the option slot. A

program may contain several audio signals. You select the audio

program to be decoded by pressing the Enter key and stepping

through the list of available audio programs. If you select “Auto”

the S

TELLAR

automatically decodes the audio program with the

lowest PID not already in use. “Off” disables decoding. This is an

optional audio output.

Program selection

Select audio 1 PID

Select audio 2 PID

Only if secondary audio card installed

Select Nx64 PID

Select program

<no> : Program name

99-031