Service manual

18
Customized connector panel
2
Installation
SPI transport stream input SPI IN
AandB
2 x 25-pin sub-D female
ASI transport stream input ASI A IN
OUT 
←
 IN
ASI B IN
IN 
→
 OUT
2x2BNC.
Two inputs with active
loop-through
V.35 input IN
OUT
2 x 25-pin sub-D female.
One input with active
loop-through.
Audio output Text on the rear panel Connector type
Audio ch. 1. Analog
stereo audio output
AUDIO OUT 1
L, R
2 XLR female. The left
connector is shared with
the digital stereo output
Audio ch. 2. Analog
stereo audio output
AUDIO OUT 2
L, R
2XLRfemale.
The connectors are shared
with the digital stereo
output
Audio ch. 1. Digital stereo
audio output
AUDIO OUT 1
AES/EBU
1XLRfemale
(left connector)
Audio ch. 2. Digital stereo
audio output and clock
input
AUDIO OUT 2
AES/EBU, CLK
2XLRfemale
Network or TS Output Text on the rear panel Connector type
ASI restamping output ASI OUT 1 and 2 2 BNC
SMPTE 310M output SMPTE 310M OUT
AandB
2BNC
Control, alarm and data Text on the rear panel Connector type
Auxiliary data on RS-232 AUX RS-232 9-pin sub-D female
Auxiliary data on RS-422 AUX RS-422 9-pin sub-D female
N x 64 kbit/s data N x 64 kbit/s OUT 9 pin sub-D female
Contact control CONTACT CONTROL 9-pin sub-D female
RS-485 remote connector RS-485 9-pin sub-D male
Alarm relays ALARM 15-pin HD sub-D female
Control Text on the front panel Connector type
RS-232 local connector CONTROL 9-pin sub-D female
Network or TS input Text on the rear panel Connector type
V.35