Service manual

120
Replacing an AC fuse in the power supply
5
Service and maintenance
◆
Replacing an AC fuse in the power supply
To replace an AC fuse Caution! There is a fuse in both phase conductors.
To replace an AC fuse do the following:
1. Turn off the power to the S
TELLAR
.
Remove the power cord from the S
TELLAR
.
2. Open the lid holding the fuses.
Use a flat bladed screwdriver.
3. Pull out the lid.
4. Remove the blown fuse.
5. Insert a new fuse with the same rating.
Caution! For continued protection against risk of fire replace only with same
type and rating of fuse.
6. Reinsert the lid.
98-017