Service manual

Setting up the profiles
115
4
2. Select one of the unused lines from the list and click the New button.
3. Type in the name of the recording and click the OK button.
The codec file is stored locally on the ROSA PC. In a ROSA/C
OPERNICUS
sys-
tem the program profile is stored on the C
OPERNICUS
server.
4. Click Apply.
To download settings Do as follows to download settings to the S
TELLAR
:
1. From the Copernicus Explorer right click on the S
TELLAR
to update and
select properties.
Note! The decoder to which you are downloading settings must have the
same hardware configuration as the one from which you have
uploaded the settings.
2. Click on the relevant profile tab.
Use the Codec profile tab to download settings from a local ROSA PC, or click
on the Program profile tab to download settings from the C
OPERNICUS
server.
3. Select the profile to download.
4. Click Activate.
Server busy window During download of a profile, the following window may appear if you operate the
PC before the download has finished:
If it appears, just press the Retry button, and wait until the download has finished.