Service manual

Macro commands

111

1. Connect the switch between contact closure 1 and ground.

In the “program 2" position the contact is open, in the “program 1" position it is

closed.

2. Type in the below macros and press Enter after each line.

MACRO 1 OPEN REC

PROGSEL=MAN,1

MACRO END

MACRO 1 CLOSE REC

PROGSEL=MAN,2

MACRO END

Useful hints for macro

writing

The following hints are useful when writing macros.

• If desired, a macro can contain several command lines.

• Force-execute a macro by typing “MACRO <number> <contact>” and pressing

Enter.

Force-executing a

macro, example

Executing the “MACRO1OPEN” command with the above macro causes the S

TEL

LAR

to activate program 1, while executing the “MACRO 1 CLOSE” command

causes the S

TELLAR

to activate program 2.