Instruction manual

11. Light Pad adjustment
6. Proceed to overall focus, using the adjustable nuts A, B and C. Added picture indicates the picture rotation around the vertical,
horizontal or diagonal axis when turning the respective nut. (image 11-3)
Tip: The adjustment of the nuts A, B and C have an influence each other. Therefore, some iterations will be probably neces-
sary.
7. Secure the position of the lens holder by tightening screw (4) as follows:
- Drive in the screw until you feel mechanical resistance and
- From this position, add a half turn.
8. Repeat step 6.
9. Secure the position of the adjustable nuts by tightening the matching screw 1, 2 and 3.
10.Finally, secure the lens lock screws by tightening the matching nut.
Image 11-2
In focus picture search
A
B
C
C
A
B
C
B
A
B
C
A
Image 11-3
Overall focus adjustment
74 R5976766 RLM G5 22/04/2004