Instruction manual

8. Module/Unit Identification
Unit / Board
Description Partnumber
A
Cooling lamp burner top Part of kit B401042K
B
Cooling lamp burner bottom Part of kit B401042K
C Cooling lamp Part of kit B401042K
D Exhaust Fan
Part of kit B401042K
E Lamp unit kit R9841880
8.6 IR Receiver Front
8.6.1 IR Receiver Front swapping
How to swap the IR Receiver front
To access the IR Receiver front, the engine and t
he lens holder have to be removed.
1. Disconnect the IR Receiver board. (image 8-23)
2. Remove the 2 screws securing the board to fro
nt cover.
3. Remove the board.
2
1
A
Image 8-23
IR Receiver removal
8.7 Motor/Control Board
8.7.1 Motor/Con
trol board swapping
How to rem
ove the motor-control board
To access the motor control board, only the top cover of the projector has to be removed.
1. Remove the
2 screws (1&2) , securing the board on top and bottom. (image 8-24)
2. Slide the motor control board out the board slots (A&B) to remove (image 8-24).
3. Pull out all the plugs to allow board swapping (Order No kit: B401032K).
R5976766 RLM G5 22/04/2004
35