Instruction manual
8. Module/Unit Identification
8.4.2 Parts of the input Box Assembly
Which boards belong to the Input box cpl
A
A
1
A
2
A
3
A
4
A
5
Image 8-17
Parts of the input box cpl
Unit / Board
Description Partnumber
A Input box cpl B401033K
A1 Input backplane board
Part of kit B401033K
A2
RGBHV/Composite Video/S-Video input board Part of kit B401033K
A3
DVI/Computer/RS232C/RC input board Part of kit B401033K
A4
SDI In-/Output board Part of kit B401033K
A5 2-Way hardwired Remote+Ehernet
Part of kit B401033K
8.5 Lamp Box
Overview
• Lamp unit Removal
• Parts of the Lamp box
8.5.1 Lamp unit Removal
CAUTION: Let cool down the projector before handling the lamp house to avoid burning.
How to remo
ve the lamp unit from lamp house
1. Loosen the 2 spring screws (E) securing the fan door to the lamp house. (image 8-18)
2. Rotate (F) the fan door counterclockwise to open. (image 8-19)
3. Loosen the 2 spring screws (G) securing Lamp unit onto base plate. (image 8-20)
4. Disconnect the lamp plug (H) by pulling the lamp unit to the right.
5. Take the lamp unit out (I) the lamp house. (image 8-21)
R5976766 RLM G5 22/04/2004
33