Instruction manual

7. Projector Cover Removal to access Modules
Image 7-2
Button panel cover removal
7.1.3 Removal of the top cover
Howtoremovethetopcover
1. Remove the screw (A) securing both plates blocking the slots for the rear cover guides. (image 7-3)
2. Pull out the respective plugs, connecting Control panel (A) and LED panel (B) to projector electronic. (image 7-4)
3. Loosen the top cover by turning the cover lock screw (A) half a turn counterclockwise. (image 7-5)
4. Lift up the top of the cover a little and move the cover backwards to slide both rear cover guides (A) out of their slot (B). (image 7-6)
5. Remove the top cover.
Image 7-3
Blocking plates removal
Image 7-4
Disconnection LED and Control panel
18 R5976766 RLM G5 22/04/2004