User manual

CHAPTER 4

Preset Programming

SolaSpot LED

User Manual 35

Set Input by Out

This Scene Edit option allows you to capture the parameter values for a scene from DMX input into

the fixture. Once you create a look from a DMX console do the following:

1. Navigate to and select the Preset menu as shown on page 33.

2. Use the buttons to scroll to the Edit Scenes option and press to select.

3. Use the buttons to scroll to the Scene number you wish to build on from 1-250 and

press to select.

4. Use the button to scroll to the Input by Out and press to select.

5. The scene will record the current parameter values being input via DMX.

6. When you are finished capturing DMX into a scene, press to return to the main menu.

Edit Program

This preset menu option lets you select from 10 factory set programs to edit. You can set up to 64

Scenes in a sequence of Steps for each program. You can also test the program at any time by

selecting Program Test to playback the program as it is currently defined.

To edit a program:

1. Navigate to and select the Preset menu as shown on page 33.

2. Use the buttons to scroll to Edit Prog. menu and press to select.

3. Use the buttons to scroll to a program from Program 1–Program 10 and press

to select.

4. Use the buttons to scroll to the Step in the program you want to edit from Step 1 to

Step 64 and press to select. The display will show which scene is currently assigned to

that step.

5. Use the buttons to scroll to the scroll to the scene you want to assign to the step

and press to select.

6. When you have assigned all the steps you want, select End and press to save the

program.