Owner`s manual

ManualsBrandsBarco ManualsProjectorR9827880

6. Random Access

6.5.7.5.1 Start up

How to Start up the Fine adjustment ?

1. Push the cursor key ↑ or ↓ to highlight Fine in the Edit menu. (menu 6-77)

2. Press ENTER to select.

The Geo m etry Distortion menu will be displayed. (menu 6-78)

GUIDED GEOMETRY MAP

COARSE

LINEARITY

FINE

SHIFT

TRANSPORT DELAY

BLANKING/SOFT EDGE

RESET

Select with ↑ or ↓

then <ENTER>

<EXIT> to return

Menu 6-77

GEOMETRY DISTORTION

hor lin left top

col=2

row=0

pixelsx=0

y=0

subpixelsx=0

y=0

Menu 6-78

6.5.7.5.2 Horizontal or Vertical Linearity selection

What can be done ?

Within this menu it is possible to fine tune the linearity of the projected image.

The Linearity adjustment is best done when a hatch pattern is projected on the screen.

By pressing the * key on the RCU an internal hatch pattern is projected instead of the image data.

How to select the Horizontal or Vertical Linearity ?

1. Push the cursor key ↑ or ↓ to highlight the Fine selection. (menu 6-79)

2. By default hor lin is already selected, if not, press ENTER to scroll through the available Fine selections until

hor lin or ver lin is

displayed.

3. Push the cursor key ← or → to select the desired horizontal or vertical linearity point.

The COL & ROW indicator will show the corresponding position of the selected grid point and an indication box will show the

selected grid point on the screen. (image 6-34)