Owner`s manual

6. Random Access
By pressing the * key on the RCU an internal hatch pattern is projected instead of the image data.
HowtoperformacoarselinearityadjustmentbyusingtheSideBows?
We assume side bow top is selected.
1. Push the cursor key ↑ or ↓ to select pixel x = 0 in the Geom etry Distortion menu. (menu 6-65)
2. Push the cursor key ← or → to coarse shift the selected Side Bow in a horizontal way.
3. Repeatstep1to2fortheCoarseside bow bottom selection.
This will shift the vertical center line, resulting in a coarse horizontal linearity adjustment (Follow this procedure in a similar way
to shift the horizontal center line). (image 6-24)
4. Use the subpixel adjustments to fine shift the selected Side Bows.
5. Continue with the Coarse Center adjustment or press EXIT to return to the Guided Geometry Map menu.
GEOMETRY DISTORTION
side bow top
col=4
row=0
pixelsx=0
y=0
subpixelsx=0
y=0
Menu 6-65
Image 6-24
Usingsidebowstoperformacoarselinearityadjustment
74 R5976661 BARCO TRACE 04122003