Owner`s manual

6. Random Access
6.5.1 Introduction
What can be done with the WARP 6™ Geometry adjustments ?
With the new WARP 6™ fitted in theBarco TRACE, fixed-matrix projectors can be used in a wide variety of curved-screen applica-
tions, ranging from straightforward cylindrical displays to the wildest shapes that can be imagined: by pre-distorting the image inside
the projector, a correct geometry can be achieved on curved screens, without requiring additional computational power on the IG’s
side. Since WARP 6™ is integrated in the Barco TRACE Pixel Map Processor, it is an elegant and user-friendly solution for even
the most demanding applications.
Using the intuitive user interface, bows can be set up and modified in a flash, giving the user real-time access to the dist
ortion
characteristics. For fine-tuning the image, the user has to access to individual grid points that can be shifted to their desired location.
6.5.2 Starting Up Geometry
How to Start Up Geometry?
1. Push the cursor key ↑ or ↓ to highlight G eometry. (menu 6-50)
2. Press ENTER to select.
The Geometry files menu will be displayed. (menu 6-51)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
STEREO OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-50
GEOMETRY FILES
LOAD
EDIT
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-51
6.5.3 Geometry file annotation
HowisaGeometryfilebuiltup?
ThefilenotationintheGeometry files menu is built up in different parts. Let us have a look to these parts.
Take the following notation : xxxxxxxx.eee
xxxxxxxx
base name, 8 characters
eee
file extension:
first character t : geometry preset file.
first character g : geometry user file.
The second and third character is used for a following number (= file
index). The file index for custom files : 00 to 63.
Table 6-9
6.5.4 Setting up a new Geometry file
How to set up a new Geometry file ?
1. Load the start up file: t_nodist.t01.
2. Select the EDIT menu and perform the necessary adjustments.
3. When leaving the EDIT m
enu a new geometry user file is automatically saved.
64
R5976661 BARCO TRACE 04122003