Owner`s manual

6. Random Access
How to return to the Default Factory Preset?
1. Push the cursor key ↑ or ↓ to highlight Default and press ENTER to select. (menu 6-38)
The input balance is set to the default factory preset.
INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Adjust
red with ↑ or ↓
blue with ← or →
Menu 6-38
6.4.5 Input Balance 2
What can be done?
When a Stereo Image is projected, within this menu, it is possible to adjust the Input Balance of the Right Image.
Follow the same steps as described above in ’Steps to be taken’ see "Input Balance 1", page 55.
How to Start Up Input Balance 2?
1. Push the cursor key ↑ or ↓ to highlight Input Balance 2. (menu 6-39)
2. Press ENTER to select.
The Input Balance menu will be displayed. (menu 6-40)
3. For more information on adjusting the White and Black Balance see "Input Balance 1", page 55.
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
INPUT BALANCE 1
INPUT BALANCE 2
WINDOWING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-39
INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Adjust
red with ↑ or ↓
blue with ← or →
Menu 6-40
6.4.6 Windowing
Overview
• Starting Up Windowing
• Blanking (Windowing)
• Shift (Windowing)
• Size (Windowing)
• Geo Soft Edge
58
R5976661 BARCO TRACE 04122003