Owner`s manual

6. Random Access
How to adjust the Black Balance?
1. Generate a full black image on the source. (image 6-4)
2. Push the cursor key ↑ or ↓ to highlight Black Balance and press ENTER to select. (menu 6-36)
3. Use the cursor keys ← and ↓ to lower the Black Level of the Blue and Red color.
4. Use the Brightness + or – key to adjust the Black Level of the Green Color until there is ±50% noise visible. (image 6-5)
5. Use the → and ↑ key to raise the Black Level of the Blue and Red Color until there is ±50% noise visible.
6. Press EXIT to return to Input Balance menu.
INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Adjust
red with ↑ or ↓
blue with ← or →
Menu 6-36
Image 6-4
Full black image on the source
Image 6-5
Perfect Black Balance
How to adjust the White Balance?
1. Generate a full white image on the source. (image 6-6)
2. Push t
he cursor key ↑ or ↓ to highlight White Balance and press ENTER to select. (menu 6-37)
3. Use the cursor keys ← and ↓ to lower the Gain of the Blue and Red color.
56
R5976661 BARCO TRACE 04122003