Owner`s manual

5. Getting Started
Image 5-5
Loosen the 2 bolts connecting the Top Rear Cover to the Barco
Trace
Image 5-6
Adjust the Focus of the lens by turning the Focus Ring
5.4.2 Quick OSD C
olor Change
What can b
e done?
Quick change of the color of the highlighted items.
The highlighted items can be displayed in:
•Red
• Green
•Yellow
How to change the On Screen Color
1. Press ADJUST or
ENTER key to start up the Adjustment Mode.
2. Push the cursor key ↑ or ↓ to highlight Installation. (menu 5-3)
3. Press ENTER to select.
The OSD menu will be displayed. (menu 5-4)
4. Push the cursor key ↑ or ↓ to highlight the desired color.
5. Press ENTER to activate the selected color.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATIO
N
OSD COLOR
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-3
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with ↑ or ↓
<ENTER> to accept
<EXIT> to return
Menu 5-4
5.5 Using the RCU
Pointing to the Screen
1. Point t
he front of the RCU to screen. (image 5-7)
34
R5976661 BARCO TRACE 04122003