Owner`s manual

5. Getting Started
16
Cursor keys to make menu selections when in the adjustment mode or to zoom/focus when the direct
access is active.
Comparison between the cursor keys and the use of the ’+’ and ’-’ keys on the local keypad
: RCU = local keypad
cursor key up = ’+’ key up
cursor key down = ’-’ key down
cursor key right = ’+’ key right
cursor key left = ’-’ key left
17 EXIT to leave the adjustment mode or to scroll upwards when in the adjustment mode.
18
RCU operation indication lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
Table 5-1
5.3 Operating the projector
Overview
• Switching On
• Switching to standby
• Switching off
• Temperature error DMD
5.3.1 Switching On
The Barco TRACE will Start Up to Standby automatically when inserting the Power Cord, the Barco TRACE
Status Led, located on the front side sill light up red.
Starting image projection
1. Press Stand by key once on the local keypad or on the remote control. (image 5-2)
The projector mode indication lamp will be green.
Or,
Press a digit button to select an
input source.
COLOR CONTRAST
PHASE
SHARPN
TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2
1
4
3
5
6
8
0
9
7
F1
F2
F3
F4
F5
ADJ
EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE
BALANCE
BASS
VOL
9
0
7
8
5
6
34
1
2
1
Image 5-2
Standby key
R5976661 BARCO TRACE 04122003 31