Owner`s manual

3. Installation Guidelines
Image 3-5
Turn the retaining bolt a quarter counter clockwise
Image 3-6
Flip the cover to the left side and take off
How to re-adjusting the lamp position?
1. Start up the adjustment mode and select Service. (menu 3-1)
2. Select Lamp. The Z-axis indication (lamp menu in service mode) will be helpful while turning screw B . (menu 3-2)
3. Loosen the nut A on the back of the lamp casing (nutdriver 10).
4. Adjus
t the screw B with an Allen key by turning a little clockwise until the maximum light output is reached (the maximum value
of the Z-AXIS indication on the lamp menu).
5. Fasten the nut on the back of the lamp casing to secure this position (nutdriver 10).
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
I
NSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 3-1
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
C
HANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 3-2
LAMP
Constant Light output [OFF]
Mode [NORMAL]
Serial number : R101111
A
rticle number : R9840xxx
Run time : 10 hours
Remaining run time : 490
hou
rs
Number of strikes : 10
Z_AXIS : 100
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 3-3
16 R5976661 BARCO TRACE 04122003