Owner`s manual

3. Installation Guidelines
Only ever use the manufacturer’s recommended cleaning kit which has been specifically designed for cleaning optical parts, never
use industrial strength cleaners on the projector’s optics as these will degrade optical coatings and damage sensitive optoelectronics
components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contam-
inants will culminate in extensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will
be non-effective and impracticable. Damage of this nature is under no circumstances covered under the manufacturer’s warranty
and may deem the warranty null and void. In such a case the client shall be held solely responsible for all costs incurred during any
repair. It is the clients responsibility to ensure at all times that the projector is protected from the harmful effects of hostile airborne
particles in the environment of the projector. The manufacturer reserves the right to refuse repair if a projector has been subject to
wantful neglect, abandon or improper use.
Special Care for Laser Beams
Special care should be used when DLP projectors are used in the same room as performant laser equipment. Direct or indirect
hitting of a laser beam on to the lens can severely damage the Digital Mirror Devices (TM) in which case there is a loss of warranty
3.3 Projector Position
Projector Position of the Barco TRACE
An Active Barco TRACE always has to be placed on a flat surface, this will always be conform with the General Projector Position
Guidelines.
General Projector Position Guidelines
The lamp axis, as it is drawn on this picture, can be oriented according to the specifications:
• pointed in any downward direction
• up to 15° in an upward position.
Image 3-1
Projector position
Never use the projector when turned with the inputs downwards.
14 R5976661 BARCO TRACE 04122003