Owner`s manual

A. Standard Source Files
A. STANDARD SOURCE FILES
A.1 Table overview
Table overview
The following standard source files are pre-programmed in the projector.
Name
3
Resolu-
tion
4
Fvert
Hz
5
FHor
kHz
6
Fpix
MHz
7
Ptot
8
Pact
9
Ltot
10
Lact
11
1600_60v 1600x1200 60,000 75,000 162,000 2160 1600 1250 1200
ews_50 1280x1024 50,000 52,350 87,948 1680 1280 1047 1024
ews_60 1280x1024 60,000 63,900 107,352 1680 1280 1065 1024
svga_60v 800x600 60,317 37,879 40,000 1056 800 628 600
vga_gr
640x480 59,941 31,469 25,175 800 640 525 480
xga_60 1024x768 60,000 48,360 64,996 1344 1024 806 768
sgi_108v 1280x1024 108,000 112,676 164.145 1460 1280 1041 1024
sgi_110v 1280x1024 110,000 114,286 167.160 1464 1280 1038 1024
hp_100v 1280x1024 100,000 108,108 187.488 1728 1280 1085 1024
sxga_96s 1280x1024 96,000 104,000 167,885 1600 1280 1093 1024
sxga_114s 1280x1024 114,000 124,600 199,363 1600 1280 1093 1024
xga_96s 1024x768 96,000 77,500 99,164 1280 1024 807 768
xga_120s 1024x768 120,000 96,700 123,955 1280 1024 807 768
Table A-1
3. Name: name of file, contains the settings.
4. Resolution: image resolution, when followed by ..i means interlaced.
5. Fvert Hz: vertical frame frequency of the source
6. FHor kHz: horizontal frequency of the source
7. Fpix MHz: pixel frequency
8. Ftot : total pixels on one horizontal line.
9. Pact: active pixels on one horizontal line.
10. Ltot: total lines in one field
11. Lact: active lines in one field.
R5976661 BARCO TRACE 04122003 143