Owner`s manual

8. Service Mode
5. Use the cursor keys to match the color gamuts of all projectors to the Common Color Gamut.
6. Press ENTER to confirm.
DYNACOLOR
COLOR COORDINATES
EXEC. LINKED DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-41
DYNACOLOR
MEASURED
xyY
R: 0.650 0.338 0.110
G: 0.315 0.550 0.380
B: 0.144 0.070 0.040
W: 0.316 0.332 1
DESIRED
xy
R: 0.650 0.338
G: 0.315 0.550
B: 0.144 0.070
W: 0.316 0.332
STATUS [NOT ACTIVE]
<ENTER> to edit/confirm
or
<EXIT> to return
press <*> for factory preset
Menu 8-42
Press the * key to reset the DynaColor™ to the factory preset.
How to Execute the Linked DynaColor™ command?
1. Push the cursor key ↑ or ↓ to highlight Exec. Linked DynaColor™. (menu 8-43)
2. Press ENTER to execute.
This will execute the Linked Dynacolor™ command, all projectors in the linked setup will be set to their Common Color Gamut.
DYNACOLOR
COLOR COORDINATES
EXEC. LINKED DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-43
142 R5976661 BARCO TRACE 04122003