Owner`s manual

8. Service Mode
How to display the Formatter Diagnosis screen?
1. Push the cursor key ↑ or ↓ to highlight Formatter. (menu 8-35)
2. Press ENTER to select.
The Formatter Diagnosis screen will be displayed. (menu 8-36)
3. Press EXIT to return to the Service Mode menu.
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-35
FORMATTER
I2C (34H) OK
CONFIGURATION OK
INITIALISATION OK
SELF TEST OK
RED DISPLAY OK
GREEN DISPLAY OK
BLUE DISPLAY OK
<EXIT> to return
Menu 8-36
8.13.4 SMPS Diagnosis
What can be done?
This info screen will give an overview of the status of the Switch Mode Power Supply (SMPS) board.
How to display the SMPS Diagnosis screen?
1. Push the cursor key ↑ or ↓ to highlight SMPS. (menu 8-37)
2. Press ENTER to select.
The SMPS Diagnosis screen will be displayed. (menu 8-38)
3. Press EXIT to return to the Service Mode menu.
DIAGNOSIS
I2C
FORMATTER
SMPS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-37
SMPS
I2C (30H) OK
AMBIENT TEMPERA OK
NTC OK
TILT SWITCH OK
MICRO SWITCH OK
LAMP TEMPERATUR OK
LPS MAINS OK
SMPS OUTPUT OK
<EXIT> to return
Menu 8-38
8.14 DynaColor™
This menu item is only used when working with a multichannel setup.
What can be done?
DynaColor™ will eliminate channel-to-channel color v
ariations.
How to define color?
The CIE chromaticity diagram is one way to plot the colors the human eye can see.
138
R5976661 BARCO TRACE 04122003