Owner`s manual

8. Service Mode
Following Convergence Adjustment Patterns are available:
• Green
• Blue On Green
• Red On Green
•BlueOnRed
•Hatch
How to adjust the Electronic Convergence?
1. Push the cursor key ↑ or ↓ to highlight Electronic Convergence. (menu 8-29)
2. Press ENTER to select.
The Convergence menu will be displayed.
3. Push the cursor key ↑ or ↓ to select the desired Convergence Adjustment Patterns, e.g. Blue on Green. (menu 8-30)
The selected Convergence Adjustment Patterns and Convergence Barscale will be displayed.
4. Use the cursor keys to adjust the Convergence of the projected image.
5. Press EXIT to return to the Convergence menu.
6. Press EXIT to return to Service menu.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-29
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
BLUE ON GREEN
HATCH
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-30
8.13 Diagnosis
Overview
• Starting Up Diagnosis
•I
2
C Diagnosis
• Formatter Diagnosis
• SMPS Diagnosis
8.13.1 Starting Up Diagnosis
What can be done?
Following items can be checked using the Diagnosis menu:
•I
2
CBus
• Formatter Board
• Switch Mode Power Supply (SMPS) Board
136
R5976661 BARCO TRACE 04122003