Owner`s manual

8. Service Mode
How to Start Up Preset Input Balance?
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance 1. (menu 8-25)
2. Press ENTER to select.
The following warning will be displayed: (menu 8-26)
Preset input balance is reserved to qualified service personnel. If you are not qualified, press EXIT to return to the Service menu.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-25
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to continue
<EXIT> to cancel
Menu 8-26
8.11 Preset Input Balance 2
Changing these settings may seriously affect the performance of the projector.
How to Start Up Preset Input Balance 2?
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance 2. (menu 8-27)
2. Press ENTER to select.
The following warning will be displayed: (menu 8-28)
Preset input balance is reserved to qualified service personnel. If you are not qualified, press EXIT to return to the Service menu.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE 1
PRESET INPUT BALANCE 2
ELECTRONIC CONVERGENCE
DIAGNOSIS
DYNACOLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-27
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to continue
<EXIT> to cancel
Menu 8-28
8.12 Electronic Convergence
Changing these settings may seriously affect the performance of the projector.
This adjustment is best done by a qualified se
rvice technician.
What can be done?
The convergence of the projected image can be adjusted in this menu.
R5976661 BARCO TRACE 04122003
135