Owner`s manual

8. Service Mode
8.9.4 Shift BARCO Logo
How the Adjust the BARCO Logo Position?
1. Push the cursor key ↑ or ↓ to highlight Shift. (menu 8-22)
2. Press ENTER to select.
The Shift Adjustment menu will be displayed. (menu 8-23)
3. Use the cursor keys to shift the BARCO Logo to the desired position on the screen.
4. Press EXIT to return to the Barco Logo menu.
BARCO LOGO
STATUS [OFF]
BACKGROUND [OFF]
SHIFT
HOT KEY [OFF]
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 8-22
SHIFT
Shift logo with ↑,↓,←,→
<EXIT> to return
Menu 8-23
8.9.5 Hot Key
How to Change the Hot Key Setting?
1. Push the cursor key ↑ or ↓ to highlight Hot Key. (menu 8-24)
2. Press ENTER to toggle the Hot Key Setting [ON] or [OFF].
[ON] The TEXT key on the RCU is used to display or to remove the BARCO Logo with one single push on this key
(only in operational mode)
[OFF] No key on the RCU is used to display the BARCO Logo
3. Press EXIT to return to the Service menu.
BARCO LOGO
STATUS [OFF]
BACKGROUND [OFF]
SHIFT
HOT KEY [OFF]
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 8-24
8.10 Preset Input Balance 1
Changing these settings may seriously affect the performance of the projector.
134 R5976661 BARCO TRACE 04122003