Owner`s manual

6. Random Access
Image
Frame Left
Stereo Sync
Left
Right
Delay Time
Stereo Sync
Left
Right
Frame LeftFrame Right
Without Stereo Phase Adjustment
With Stereo Phase Adjustment
t
Image 6-56
Stereo Phase Adjustment
How to adjust Stereo Phase?
1. Push the cursor key ↑ or ↓ to highlight Stereo Phase. (menu 6-145)
2. Press ENTER to select.
The Stereo Phase bar scale, displaying the Stereo Phase Adjustment Steps (1 Step = 400 nanoseconds, Range from 0 to 1500),
will be displayed. (image 6-57)
3. Push the cursor key ← or → for a fine adjustment of 1step, or
push the ↑ or ↓ keys for a coarse adjustment of 100 steps.
Note: Adjustment is po ssible until a full frame delay is reached.
4. Press EXIT to return to the Stereo Options menu.
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-145
STEREO PHASE
1500
Image 6-57
TheStereoPhasebarscale
6.6.3 Invert Stereo
What can be done?
With Invert Stereo we can invert the stereo emitter signal (Left eye opens when a right image is supplied to the projector)
R5976661 BARCO TRACE 04122003
109