Owner`s manual

6. Random Access
4. Press ENTER to select.
If [all] is selected, your password has to be entered before all files will be deleted.
A confirmation menu "Delete file name ?" is displayed. (menu 6-142)
5. Press ENTER to delete the file, press EXIT if you want to keep it.
Note: The active file cannot be deleted.
GEOMETRY FILES
LOAD
EDIT
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-140
DELETE FILE
F
ilename
geometry.g01
t_bowing.t06
t_bowlin.t02
t_keyst.t03
t_nodist.t01
-------------------------------
Active file : geometry.g01
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 6-141
CONFIRM
DELETE FILE
Delete file :
geometry.g01
Select with ← or →
Reprogram with ↑ or ↓
<ENTER> to confirm
<EXIT> to return
Menu 6-142
6.6 Stereo Options
Overview
• Starting Up Stereo Options
• Stereo Phase
• Invert Stereo
• Master Channel
• Stereo Mode
•DarkTime
• Forced Asynchronous
6.6.1 StartingUpStereoOptions
Only available in Stereo Mode
The Stereo Options menu is only available when the projector is running in Stereo Mode = when a Stereo Source is provided by the
IG.
When running in Mono Mode these items will be grayed out.
How to Start Up Stereo Options?
1. Push the cursor key ↑ or ↓ to highlight Stereo Options. (menu 6-143)
2. Press ENTER to select.
The Stereo Options menu will be displayed. (menu 6-144)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
STEREO OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-143
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-144
6.6.2 Stereo Phase
What can be done ?
With Stereo Phase it is possible to apply an adjustable time delay on the stereo emitter signal.
108
R5976661 BARCO TRACE 04122003