Owner`s manual

6. Random Access
6.5.7.10.3 Linearity Reset
How to reset the Linearity adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Linearity within the Geometry Reset menu. (menu 6-125)
2. Press ENTER to select.
A warning will be displayed . (menu 6-126)
3. Press ENTER to reset the Linearity adjustments
Or,
Press EXIT to return to the Geometry Reset menu.
GEOMETRY RESET
COARSE
LINEARITY
FINE
BLANKING/SOFT EDGE
ALL
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-125
WARNING
This action will
reset the selected
geometry settings!
are you sure?
<ENTER> to confirm
<EXIT> to return
Menu 6-126
6.5.7.10.4 Reset Fine
How to reset the Fine adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Fine within the Geometry Reset menu. (menu 6-127)
2. Press ENTER to select.
A warning will be displayed . (menu 6-128)
3. Press ENTER to reset the Fine adjustments
Or,
Press EXIT to return to the Geometry Reset menu.
GEOMETRY RESET
COARSE
LINEARITY
FINE
BLANKING/SOFT EDGE
ALL
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-127
WARNING
This action will
reset the selected
geometry settings!
are you sure?
<ENTER> to confirm
<EXIT> to return
Menu 6-128
6.5.7.10.5 Reset Blanking/Soft Edge
How to reset the Blanking/Soft Edge adjustments ?
1. Push the cursor key ↑ or ↓ to highlight Blanking/Soft Edge within the Geometry Reset menu. (menu 6-129)
2. Press ENTER to select.
The Soft Edge Reset menu will be displayed. (menu 6-130)
3. Push the cursor key ↑ or ↓ to highlight Soft Edge or All in the Soft Edge Reset menu.
Soft Edge Only the Soft Edge Width values will be reset to their default values.
All
All Blanking/Soft Edge values will be reset to their default values.
104 R5976661 BARCO TRACE 04122003