Owner`s manual

6. Random Access
6.5.7.9.3 Soft Edge Start up
How to Start up Soft Edge ?
1. Push the cursor key ↑ or ↓ to highlight Blanking/Soft Edge menu. (menu 6-109)
2. Press ENTER to select.
The Blanking/Soft Edge menu will be displayed. (menu 6-110)
GUIDED GEOMETRY MAP
COARSE
LINEARITY
FINE
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-109
BLANKING/SOFT EDGE
ACTIVE [OFF]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-110
6.5.7.9.4 Soft Edge Active On
How to switch Soft Edge Active On ?
1. Push the cursor key ↑ or ↓ to highlight Active in the Blanking/Soft Edge menu. (menu 6-111)
2. Press ENTER to switch Soft Edge Active [OFF] to [ON]. (menu 6-112)
In the default setting Active is set to [OFF].
[OFF] Soft Edge is disabled
[ON] Soft Edge is enabled
BLANKING/SOFT EDGE
ACTIVE [OFF]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-111
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-112
6.5.7.9.5 Soft Edge Shape Start up
What can be done with the Soft Edge Shape menu ?
Before creating a soft edge, an overlap zone is created, the shape of this overlap zone is fully adjustable, within this menu the shape
of the blending zone is aligned with the shape of the overlap zone.
96
R5976661 BARCO TRACE 04122003